5. Fax
28
Maximum document size
Effective scanning area
L Shaded area will be scanned.
Document weight
L Single sheet: 45 g/m
2
to 90 g/m
2
L Multiple sheets: 60 g/m
2
to 80 g/m
2
Note:
L Remove clips, staples or other fasteners.
L Do not send the following types of
documents: (Make a copy of the document
and send the copy.)
– Chemically treated paper such as carbon
or carbonless duplicating paper
– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface
– Paper with a faint image
– Paper with printing on the opposite side
that can be seen through the other side,
such as newsprint.
L Check that ink, paste or correction fluid has
dried completely.
L To send a document with a width of less than
210 mm, we recommend using a copy
machine to copy the original document onto
A4 or letter-sized paper, then sending the
copied document.
5.3 Sending faxes using
the one-touch dial feature
and navigator directory
Before using this feature, store the desired
names and telephone numbers for the one-touch
dial feature and navigator directory (page 18).
1 Open the document feeder tray (1).
2 Adjust the width of the document guides (2)
to fit the actual size of the document.
3 Insert the document (up to 10 pages) FACE
DOWN until the unit grasps the document
and a single beep is heard.
L If the document guides are not adjusted
to fit the document, re-adjust them.
4 If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 27).
5 Enter the fax number.
Using stations 1–11:
Press the desired station key.
Using stations 12–22:
Press {LOWER}, then press the desired
station key.
Using navigator directory:
Press {>}, then press {A} or {B} to display
the desired item and press {FAX/START}.
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 5
times.
L To cancel redialling, press {STOP}.
600 mm
216 mm
216 mm
208 mm
4 mm 4 mm
2 mm
2 mm
{LOWER}
{>}{A}{B}
{FAX/START}
{STOP}
12
Station keys
FT-901-903-907BX.book Page 28 Monday, March 29, 2004 10:03 AM
To Next Page
Loading...
