9. Programmable Features
46
9 Progra mmable FeaturesFeatures
9.1 Programming
9.1.1 Programming basic
features
1 Press {MENU} .
2 Press {SET}.
3 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
4 Press {SET}.
L The current setting of the feature will be
displayed.
5 Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
6 Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7 To exit programming, press {MENU}.
9.1.2 Programming advanced
features
1 Press {MENU} .
2 Press {SET}.
3 Press {<} or {>} repeatedly to display
“ADVANCED MODE”.
4 Press {SET}.
5 Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
6 Press {SET}.
L The current setting of the feature will be
displayed.
7 Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
8 Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
9 To exit programming, press {MENU}.
To program by entering the program code
number directly
You can select a feature by directly entering its
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 47 to
page 50).
3. Press {SET}.
4. Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
5. Press {SET}.
6. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit.
{MENU}{SET}
{<}{>}{A}{B}
FT-901-903-907BX.book Page 46 Monday, March 29, 2004 10:03 AM
To Next Page
Loading...
