Panasonic KX-FT901CX-B

7.4.4.2. PROGRAM MODE TABLE
Code Function Set Value Default Remote setting
001 Set the date and time mm/dd/yy AM/PM --------- NG
002 Your logo --------- --------- NG
003 Your fax number --------- --------- NG
004 Print transmission report ERROR/ON/OFF ERROR OK
005 Auto receive mode FAX ONLY/TEL/FAX FAX ONLY OK
007 FAX ring count 1 to 4 rings 2ring OK
009 TEL/FAX delayed ring 1 to 4 rings 2ring OK
013 Dialing mode TONE/PULSE TONE OK
022 Journal auto print 1:ON 2:OFF ON OK
023 Overseas mode 1:ON 2:OFF OFF OK
025 Delayed send 1:ON 2:OFF OFF NG
026 Auto caller ID list 1:ON / 2:OFF ON OK
030 Silent FAX recognition ring 3 to 9 rings 3 rings OK
031 Ring detection A/B/C/D/OFF OFF OK
036 RCV reduction 1:ON 2:OFF ON OK
039 LCD contrast NORMAL/DARKER NORMAL NG
041 FAX activation code 1:ON 2:OFF ON/ID=*#9 NG
046 Friendly reception 1:ON 2:OFF ON OK
049 Auto disconnect 1:ON 2:OFF ON/ID=*0 NG
058 Original setting NORMAL/LIGHT/DARKER NORMAL OK
059 Print contrast NORMAL/DARKER NORMAL OK
060 Message transfer 1:ON 2:OFF OFF NG
070 FAX pager call 1:ON 2:OFF OFF NG
076 Connecting tone 1:ON 2:OFF ON OK
080 Set the default YES/NO NO NG
501 Pause time set 001~600 X 100 msec 050 OK
502 Flashtimeset 01~99 X 10 msec 70 OK
503 Dial speed set 1:10pps 2:20 pps 10 OK
520 CED frequency select 1:2100Hz 2:1100Hz 2100 OK
521 International mode select 1:ON 2:OFF ON OK
522 Auto standby select 1:ON 2:OFF ON OK
523 Receive equalizer select 1:0km 2:1.8km 3:3.6km 4:7.2km 0km OK
524 Transmission equalizer select 1:0km 2:1.8km 3:3.6km 4:7.2km 0km OK
544 Document feed position adjustment value set 01~99 step 50 OK
550 Memory clear Press "START". --------- NG
551 ROM check Press "START". --------- NG
552 DTMFsignal tone test 1:ON 2:OFF OFF NG
553 Monitor on FAX communication select 1:OFF 2:P-B 3:ALL OFF OK
554 Modem test Press "START". --------- NG
555 Scanner test Press "START". --------- NG
556 Motor test Press "START". --------- NG
557 LED test Press "START". --------- NG
558 LCD test Press "START". --------- NG
559 Document jam detection select 1:ON 2:OFF ON OK
560 Cutter selection (KX-FT903 ONLY) 1:ON 2:OFF ON OK
561 Key test Press any key. --------- NG
562 Cutter test (KX-FT903 ONLY) "START" push --------- NG
570 Break % select 1:61% 2:67% 61% OK
571 ITS auto redial time set 00~99 05 OK
572 ITS auto redial line disconnection time set 001~999 set 065 OK
573 Remote turn-on ring number set 01~99 10 OK
590 FAX auto redial time set 00~99 05 OK
591 FAX auto redial line disconnection time set 001~999 065 OK
592 CNG transmit select 1:OFF/2:ALL/3:AUTO ALL OK
593 Time between CED and 300 bps 1:75/2:500/3:1s 75 ms OK
594 Overseas DIS detection select 1:1st/2:2nd 1st OK
595 Receive error limit value set 001~999 100 OK
596 Transmit level set 15~00dBm 10 OK
598 Receiving Sensitivity 20~48 42 OK
710 Memory clear except History data --------- --------- NG
717 Transmit speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
718 Receive speed select 1:9600/2:7200/3:4800/4:2400bps 9600bps OK
719 Ringer off in TEL/FAX mode 1:ON/2:OFF ON OK
721 Pause tone detect 1:ON/2:OFF ON OK
722 Redial tone detect 1:ON/2:OFF ON OK
48
KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S