Code Function Set Value Default Remote setting
763 Friendly reception CNG detection select 1:10S/2:20S/3:30S 20S OK
771 T1 timer 1:35 sec/2:60 sec 35 sec OK
774 T4 timer 00~99 X 100ms 00 OK
815 Sensor check Press "START". --------- NG
874 DTMF ON time 060~200ms 090ms OK
875 DTMF OFF time 060~200ms 090ms OK
882 Journal 3 1: START --------- NG
991 Transmit basic list 1: START --------- OK
992 Transmit advanced list 1: START --------- OK
994 Transmit journal report 1: START --------- OK
999 Transmit service list 1: START --------- OK
OK : Can set the value by the remote programming feature or print a list.
NG : Cannot set the value.
Note:
Note: Refer to SERVICE FUNCTION TABLE (P.43) for descriptions of the individual codes.
For example, the "004 Transmission report mode" set value "1:ERROR/2:ON/3:OFF" number corresponds to the number
dialled.
49
KX-FT901CX-B / KX-FT903CX-B / KX-FT901CX-W / KX-FT903CX-W / KX-FT901CX-S / KX-FT903CX-S
To Next Page
Loading...
