Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
4.4 Maintenance
To keep Network Camera functioning in good condition, maintenance plays an
important part. Keep maintenance when using Network Camera. After removing
dust from the lens with an air blower, wipe the lens with lens cleaning paper.
Turning off the power is recommended when cleaning.
Lens
• When the power is on, do not manually revolve the Pan/Tilt. Revolving it
forcedly or moving it manually by some mistake may damage the Pan/Tilt
operation, or change the registered Pan/Tilt positions from actual ones.
Restart Network Camera when the latter case happens.
• Do not touch the lens. Touching it can remove the protective coating from
the lens. Fingerprints, dust, stains, etc. on the lens can also degrade the
performance of the Automatic Focusing feature.
• Clean the lens with lens cleaning paper.
Lens cleaning paper
Lens
To Next Page
Loading...
