Operating Instructions
98
4.1 Mounting
Two ways of mounting are shown in the following figures. MAC Address and Serial
Number are indicated on the bottom label of the main unit of Network Camera.
Record both of them on the Network Camera Memo on page 3. They are
indispensable for setting network parameters after mounting Network Camera
and for future customer servicing.
Note
Mounting and cabling instructions described in this Operating Instructions
follow generally accepted guidelines suitable for residential installations. In
some areas, commercial and industrial installations are regulated by local or
state ordinances. For such installations, contact your local building department
or building inspector for more details.
4.1.1 Mounting on the Table
Mount Network Camera at an even place where vibrations etc. are few.
Note
Network Camera is available between 15° based on level line for mounting on
the ceiling.
To Next Page
Loading...
