Operating Instructions
66
3.6.4 Security: Administrator
Security: Administrator window allows the administrator to limit or exclude
access to the selected Network Camera. Individual levels of access can be
defined for multiple users.
Notes
• If Network Camera is to be accessed via the Internet, use
authentication window for security. It will prevent your unauthorized
person from changing your Network Camera parameters.
• Refer to page 67 for details about authentication security.
1.
Click [Security: Administrator] on Setup Page.
2.
Enter each parameter in the proper data field. Click [Save] when finished.
• Click [Cancel] to leave the current settings unchanged. The window
returns to Setup Page without saving the parameters.
• Restart to make Security: Administrator window settings effective to
all Motion JPEG viewers.
To Next Page
Loading...
