Operating Instructions
90
3.6.11 Indicator Control
Indicator Control window allows you to select Indicator operation. Indicator
operation has three patterns.
• Always on
• Turns on when accessing Network Camera
• Always off
Notes
• Indicator can be controlled in case the administrator does not want to
draw attention to Network Camera. This may be desirable when used
for security applications.
• Refer to page 14 for the Indicator color indication.
1.
Click [Indicator Control] on Setup Page.
2.
Select the Indicator on/off. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
To Next Page
Loading...
