Operating Instructions
[For assistance, please call: 1-800-272-7033] 109
5.1 Network Camera Reset Procedure—Default
Settings
If the user forgets settings or passwords, Network Camera can be easily reset to
the default settings. The FACTORY DEFAULT RESET button initializes all the
parameters except Date and Time setting.
With power on
, press the FACTORY DEFAULT RESET button for about one
second. Indicator changes such as Orange blinking twice –> Turning off about
15 seconds. Initializing takes about one minute. Pan/Tilt motors will set to the
home position.
Note
When pressing the FACTORY DEFAULT RESET button, all buffered images
are cleared.
FACTORY DEFAULT RESET button
(Press the button with a pointed object)
To Next Page
Loading...
