Operating Instructions
74
Transfer in the Alarm Mode
The Alarm mode can transfer an image via e-mail or FTP when the alarm trigger
is active. To activate the alarm trigger, the External Sensor Input of External I/O
must be connected with the external sensors/devices. The Alarm mode can send
the e-mail without transferring the image. The Alarm mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 64 about Date and Time.
1.
Click [Alarm] on Image Transfer window.
c.
b.
a.
d.
e.
f.
To Next Page
Loading...
