Panasonic KX-HCM280 - Page 114

Operating Instructions
114
No Items
Factory Default
value
Indispensable setting Note
7 1. White Balance Auto
Auto, Fixed (Indoor/Fluorescent_1/
Fluorescent_2/Outdoor), Hold
Camera Setup
2. Power Line Frequency 60 Hz 60 Hz, 50 Hz
3. Brightness Control 4. Pan/Tilt/Preset Control
Enable Enable
- - - -
- -
5. Preset Program Control Enable - -
8 Multi-Camera
6. Zoom Control Enable - -
7. Focus Control Enable -
- - -
Required when using Multi-Camera
-
8. Pan Range (Minimum) -175 degree -175 — +175 degree, current
-175 — +175 degree, current
(Home Position) 0 degree -
(Maximum) +175 degree
9. Tilt Range (On the table) Selected
-
- -
(Minimum) -120 degree - -120 — 0 degree, current
(Home Position) -90 degree -120 — 0 degree, current (Maximum) 0 degree -120 — 0 degree, current
- Tilt Range (On the ceiling) Not-selected
-
- -
(Minimum) 0 degree - 0 — +90 degree, current
(Home Position) +90 degree 0 — +90 degree, current (Maximum) +90 degree 0 — +90 degree, current
-
-
No check
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters
1. 2nd Network Camera - -
Required when using Multi-Camera Required when using Multi-Camera Required when using Multi-Camera Required when using Multi-Camera Required when using Multi-Camera
Camera Name [Blank] (*3)
and (*7)
1 to 15 Characters
2. 3rd Network Camera No check - -
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters Camera Name [Blank] (*3)
and (*7)
1 to 15 Characters
3. 4th Network Camera No check - -
IP Address or Host Name [Blank] (*1) or (*5) 1 to 255 Characters Camera Name [Blank] (*3)
and (*7)
1 to 15 Characters
9
External Output Control
1. Open/Short to GND Open
-
-175 — +175 degree, current