Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
Click to Center
When you click the certain point on the Single Camera screen, the point is
centered on the image.
1.
Put the cursor on the point which should be centered and click it.
2.
The clicked point is centered.
Notes
• Click to Center does not move over the end of corner when the Pan/Tilt
range reaches the end. The Pan/Tilt operation can be locked by Pan/Tilt
control on page 84.
• The position you click may deviate from the center, depending on the
direction of the lens.
Cursor
To Next Page
Loading...
