Operating Instructions
82
a.
Selects Transfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
[Primary] or [Secondary] on the operation bar can be displayed to
view the Buffered Image screen in Non Transfer setting.
FTP: Enters the server address*
1
or Host Name*
2
, Port number (1—
65535), Login ID*
2
and password*
2
to access the FTP server and
upload file name*
2
including full path. Time in 24 h mode is attached on
the upload file name.
Login timing:
[Every Time] or [One Time] can be selected. When selecting [Every
Time], Network Camera repeats logging in and out with each transfer
of one image. When selecting [One Time], Network Camera stays
logged in until the transfer of all images is completed. Select [One
Time] when transferring many images in short duration time.
a.
b.
To Next Page
Loading...
