Operating Instructions
88
2.
Select/Enter the each parameter. Click [Save] when finished.
• Click [Cancel] to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1
Refer to IP addressing on page 105.
*
2
Refer to unavailable character set 1 on page 105
but [:] is available.
*
3
Refer to unavailable character set 1 on page 105 and refer to displayable
character set on page 106.
Instructions for the data fields
Enable check box The checked camera image can be seen on the Multi-
Camera screen.
IP Address (or
URL)*
1
or Host
Name*
2
Enter the desired IP address of Network Camera or
Host Name and Port Number.
(You do not need to enter port number 80 [default].)
Camera Name*
3
Enter the desired Camera Name displayed only for
the Multi-Camera screen.
To Next Page
Loading...
