8. 5.3.27 SRTP Settings
Add the following configuration parameter.
DISPLAY_SRTP_CALL_ENABLE
Value Format
Description
Value Range
Default Value
9. 5.3.28 Call Control Settings
Add the following configuration parameter.
DIALPLAN_REPLACE_LOG_ENABLE
Value Format
Description
Value Range
Default Value
DIALPLAN_MEMORY_DIAL_ENABLE
Value Format
Description
Value Range
Default Value
10. 5.3.29 Logging Settings
Add the following configuration parameter.
SYSLOG_OUT_START
Value Format
Description
Value Range
Default Value
PNQX8312XA PP0316SM2086
BOOLEAN
Specifies whether to enable or disable exporting of the Application Log
・Y: Enable export to syslog
・N: Disable
N
Specifies whether to enable Dial Plan processing for memory dialing.
・Y: Enable Dial Plan
・N: Disable
Y
Specifies whether to log the number after it was modified by the Dial Plan or the
number as it was input.
・Y: Log the number in the outgoing call log after it was modified by the Dial Plan
・N: Log the number in the outgoing call log as it was input
Y
BOOLEAN
BOOLEAN
N
BOOLEAN
Selects whether an icon is displayed when the unit is using encrypted call mode
(SRTP).
・Y: Display an icon for encrypted calls
・N: Disable
To Previous Page
Loading...
