Panasonic KX-HDV100 - Network Status; Private Hold

KX‐HDV100SoftwareFileVersion02.100orlater
1. 4.2.2 Network Status
Change the followings in "Setting Mode" on page 71.
(Before)
Value Range
(After)
Value Range
2. 4.3.2 Ethernet Port Settings
Add the following WEB setting.
Enable CDP
Description
Value Range
Default Value
Configuration File Reference
Packet Interval
Description
Value Range
Default Value
Configuration File Reference
3. 4.6.1 Call Control
Add the following WEB setting.
Private Hold
Description
Value Range
Default Value
Configuration File Reference
• Disable
• LLDP
• Manual
• Disable
• LLDP
• CDP
• LLDP/CDP
• Manual
Selects whether to enable the CDP feature.
・Yes
・No
No
CDP_ENABLE
Specifies the interval, in seconds, between sending CDP frames.
1–3600
30
CDP_INTERVAL
Selects whether to enable or disable private hold.
・Yes
・No
No
PRIVATE_HOLD_ENABLE