Panasonic KX-HDV100 - Sip Settings

3. 5.3.18 SIP Settings
Add the following configuration parameter.
SIP_REPLACE_ENABLE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
SIP_INC_INVITE_RTP_MODE_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
4. 5.3.19 SIP-TLS Settings
Add the following configuration parameter.
SIP_TLS_RANDOM_PORT
Value Format
Description
Value Range
Default Value
・0: Start receiving RTP after receiving a second INVITE
・1: Start sending/receiving RTP after receiving a second INVITE
SIP_INC_INVITE_RTP_MODE_1
SIP_REPLACE_ENABLE_1
BOOLEAN
Specifies whether to use "Replaces Header".
・Y: Use "Replaces Header"
・N: Do not use "Replaces Header"
Y
Specifies whether to assign a random port (ephemeral port) number or a static
port number.
Note
・All lines that use SIP-TLS are defined by this parameter.
・UDP/TCP ports are unaffected by this parameter.
・Y: Assign a random TLS port number
・N: Assign a static TLS port number (Refer to SIP_SRC_PORT_n)
Y
INTEGER
Specifies whether to send RTP after receiving a second INVITE.
0
BOOLEAN