Panasonic KX-HDV100 - Page 3

KX‐HDV100SoftwareFileVersion02.040orlater
1. 4.5.4 VoIP Settings [Line 1]
Change the followings in "SRTP Mode" on page 117
(Before)
Value Range
(After)
Value Range
2. 5.3.23 SRTP Settings
Change the followings in "SRTP_CONNECT_MODE_n" on page 235
(Before)
Value Range
(After)
Value Range
3. 5.3.28 Call Control Settings
Add the following configuration parameter.
VM_SUBSCRIBE_SPECIFIC_n
Parameter Name Example
Value Format
Description
Value Range
Default Value
Add the following configuration parameter.
SHARED_STOP_LINE_SEIZE
Value Format
Description
Value Range
Default Value
N
• SRTP
• RTP/SRTP
Note
• RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming
calls.
VM_SUBSCRIBE_SPECIFIC_1
• SRTP
• RTP/SRTP
Note
• When RTP/SRTP is selected, operation is in RTP mode.
• 0: SRTP
• 1: RTP/SRTP
Note
• When RTP/SRTP is selected, operation is in RTP mode.
• 0: SRTP
• 1: RTP/SRTP
Note
• 0: Use only SRTP for outgoing and incoming calls.
• 1: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.
BOOLEAN
Specifies whether to stop seizing the line of the Shared Call at the unit side or
not.
・Ｙ: Stop seizing line
・N: Seize line
STRING
Specifies the defined name of a voice mail box.
Max. 32 characters
Empty string