Panasonic KX-HDV100 - Page 29

Note
R S
teps 8 and 9 can be omitted if you do not want to assign a category.
R Steps 10 and 11 can be omitted if you do not want to assign a default number. (The first number
entered for an entry will automatically be assigned as the default number.)
R The valid digits are "0" through "9", "G", "B", "J", "P".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see “Entering Characters”, Page 16.
Editing a stored item in the Local Phonebook
Editing a Stored Item
[
In standby mode]
1.
2. [D]/[C]: "Phonebook" a
OK
*1
3. Enter the name or the first character(s) of the desired name. a
OK
4. [D]
/[C]: Select the desired name. a
Menu
5. [D]
/[C]: "Edit" a
OK
6. [D]
/[C] to select the desired name, phone number, category or default telephone number. a
OK
7. Edit the data as necessary. a
OK
8. Repeat step 6 to 7 and edit the items you want to change.
9.
Save
*1 Depending on your service provider, there are cases where this menu does not appear. In this case,
s
tep 2 is skipped.
Note
R To change a character or digit, press [F] or [E] to highlight it, press
Clear
to delete it, and then enter
t
he new character or digit.
R To clear an entire line, press and hold
Clear
for more than 1 second.
R T
o move the cursor to the left or right, press [F] or [E] , respectively.
R For details about entering characters, see “Entering Characters”, Page 16.
Editing Category Names
Y
ou can edit the names of the categories in the phonebook.
[In standby mode]
1.
Menu
2. [D]
/[C]: "Basic Settings" a
OK
3. [D]
/[C]: "Display Option" a
OK
4. [D]
/[C]: "Category Name" a
OK
5. [D]
/[C]: Select the desired category number (1–9). a
OK
6. Enter a name for the category (max. 13 characters). a
OK
7. Repeat steps 5 and 6 for each category name to edit.
N
ote
For details about entering characters, see “Entering Characters”, Page 16.
29
Using the Phonebook