Overview
This document outlines the unique firmware upgrade procedure required for the listed model. Please follow
this procedure carefully to ensure successful firmware upgrade to the new version.
This firmware upgrade package contains two FW files (part1 and part2)
Firmware Update Summary
1. Put both HDV130-06.000_US.fw.part1 and HDV130-06.000_US.fw.part2
in your FW maintenance server.
2. Set the FW File path “/HDV130-06.000_US.fw.part1“ in the device.
3. The device downloads HDV130-06.000_US.fw.part1 from the server and
FW updating is done by HDV130-06.000_US.fw.part1 first.
Then the device automatically downloads HDV130-06.000_US.fw.part2 and
FW updating is done by HDV130-06.000_US.fw.part2.
HDV130-06.000_US.fw.part1
Both files are required during the update procedure to properly
upgrade the device.
HDV130-06.000_US.fw.part2
Once firmware is upgraded, you CANNOT
downgrade to Ver.1.04x or earlier.
Upgrade device to new firmware in a network
environment with no VLAN and no proxy
Do NOT rename these files!
Do NOT set “/HDV130-06.000_US.fw.part2” as FW file path
In the case of upgrade by TR069, "BOOT" and "Transfer Complete" will
be displayed with new version after the part2 upgrade is complete.
To Next Page
Loading...
