Panasonic KX-MB2100 series

KX-MB2100 series
Operating Instructions
Multi-Function Printer
For descriptions with a (y) mark, see “y List of available features and equipment” on page 3 for
availability.
R Do NOT connect the unit to a computer with the USB cable until prompted to do so during
the setup of Multi-Function Station (CD-ROM).
R It is our duty to preserve the environment.
Location selection (fax supported models only) (y):
If your unit has feature #114, you can change the location setting. See the setup list (page 95).
LA models only:
When you turn the power ON for the first time, select your location. The language for display and
reports, etc. will be changed automatically.
Language selection
If your unit has feature #110, you can change the language setting. See the setup list (page 95).
R FOR ENGLISH USERS:
When the language for display and reports is not English, you can change it to English
(feature #110).

Panasonic KX-MB2100 series Specifications

General

Brand	Panasonic
Model	KX-MB2100 series
Category	All in One Printer
Language	English

Summary

1. Introduction

1.3 Button descriptions

Explains the function of each button on the control panel for different models.

2. Installation and Preparation

2.1 Drum cartridge

2.3 Connections

Details on connecting power, telephone line, LAN, and USB cables.

2.6 Configuring the unit to access the LAN

Steps for configuring network access via DHCP or manual IP settings.

2.7 Wireless LAN settings

Procedures for connecting to a wireless network using WPS or manual setup.

2.9 Installing software (including printer, scanner and other drivers)

Detailed instructions for installing the necessary software on a computer.

3. Basic Operations

3.1 Operating the units panel

Explains how to select operation modes like Scan, Copy, or Fax.

3.2 Loading recording paper

Provides guidelines and warnings for loading paper correctly.

3.3 Setting documents

Explains how to place documents on the scanner glass or in the ADF.

3.4 Multi-Function Station

Overview of the Multi-Function Station software and its features.

3.5 Programming the unit from the operation panel

Steps for changing settings directly on the unit's control panel.

3.6 Programming features: Basic

3.7 Programming through a web browser (LAN supported models only)

5. Printing

5.1 Printing from Windows applications

Detailed steps for printing documents from Windows applications.

5.2 Easy Print Utility

6. Scanning

6.1 Scanning from the unit (Push Scan)

Instructions for scanning documents directly from the unit's control panel.

6.2 Scanning from a computer (Pull Scan)

Steps for scanning documents from a computer using the unit.

6.3 Programming features: Scan

7. Copying

7.1 Making a copy

Step-by-step guide for performing a basic copy operation.

7.2 More copying features

7.3 Programming features: Copy

8. Fax

8.3 Basic procedure for sending a fax

Step-by-step guide for sending a fax document.

8.4 Preparation for receiving a fax

8.5 Basic features of receiving a fax

8.5.6 Junk fax prohibitor

8.6 Advanced Fax features

8.7 Programming features: Fax

9. Network

9.2 Programming features: LAN

Details on programming features for LAN connection, including DHCP and IP settings.

9.3 Network features

11. Help

11.1 Report messages (Fax supported models only)

11.2 General messages

11.3 Interface messages

11.4 When a function does not work

Provides solutions for common problems with unit functions.

12. Paper Jams

12.1 Recording paper jam

Procedures for clearing paper jams from the unit's interior.

12.2 Document jams (Automatic document feeder)

Instructions for clearing document jams from the automatic document feeder.

13. Cleaning

13.1 Cleaning the white plates and glass

13.2 Cleaning the document feeder rollers

13.3 Cleaning the drum cartridge