Panasonic KX-MB2100 series - Page 129

Tray type Paper type
Tray load sheets
(Paper feed)
*1
Tray load sheets
(Paper eject)
*2
Manual tray
Thin paper
(60 g/m² to 75 g/m²)
1
100
*5
Plain paper
(75 g/m² to 105 g/m²)
1
100
*5
Thick paper
(105 g/m² to 220 g/m²)
1
1
*4
Label
1
1
*4
Envelope
1
1
*4
*1 If you load more than the specified amount of paper, a paper jam may occur and the paper may be damaged.
*2 The number of sheets may vary depending on the usage environment.
*3 Depending on the type of paper, the loaded paper may exceed the upper limit mark. In this case, remove some
paper from the tray.
*4 Thick paper and special media will be printed out from the rear side. In this case, remove each paper/media after
printing.
*5 The number of sheets that can be held in the paper exit area may vary depending on the specifications of the
paper.
129
14. General Information