Panasonic KX-MB2230JT

299
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
14.4.3. Wire dressing on the Left Side Section(Main Board)(2)
㪜
㪛
㪝
㪞
A
B
C
* Do not be short-circuited of
and
* Do not melt
A
C
B
D
E
a) Use lead free wire solder.
b) Use the soldering Jig supplied by P.E.
c) It should be control with Temperature and
duration time：370℃±10℃,within 3 sec.
After the soldering, check continuity by teseter.
(1) Check open following point. (Open:OK)
1)
Detail of UNIT/ANTENNA and Antenna Board soldering
Antenna(H) Board
Antenna(V) Board
Fix JIG
Solder
FG line
Wick line
coaxial cable