97
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
6.20.2. Scanning (ADF) (Only for KX-MB22xx)
• DOCUMENT TRANSMISSION (ADF)
The frictional force between SEPARATION ROLLER (DOC.)and SEPARATION RUBBER makes PICK UP ROLLER (DOC.)
move downward from standby position to pick up paper.
Pick-upped paper is separated by SEPARATION ROLLER (DOC.) and SEPARATION RUBBER (DOC.), and then fed by FEED
ROLLER (DOC.).
After being read by CIS, the paper is ejected by ROLLER DOC EJECT.
• DOCUMENT TRANSMISSION (SCANNER GLASS)
CIS Module is carried by the belt timing along the shaft carriage to the reading start position.
Then it goes back to the home position reading the document through the glass.
CIS
SEPARATION ROLLER (DOC.)
PICK UP ROLLER (DOC.)
SEPARATION RUBBER
FEED ROLLER (DOC.)
ROLLER DOC EJECT
To Next Page
Loading...
