Panasonic KX-MB2230JT - 15 Maintenance; Maintenance Items and Component Locations; Outline; Maintenance Check Items;Component Locations

307
KX-MB2230JT/ KX-MB2270JT/ KX-MB2515JT/ KX-MB2545JT/ KX-MB2575JT/ DP-MB310JT
15 Maintenance
15.1. Maintenance Items and Component Locations
15.1.1. Outline
MAINTENANCE AND REPAIRS ARE PERFORMED USING THE FOLLOWING STEPS.
1. Periodic maintenance
Inspect the equipment periodically and if necessary, clean any contaminated parts.
2. Check for breakdowns
Look for problems and consider how they arose.
If the equipment can be still used, perform copying, self testing or communication testing.
3. Check equipment
Perform copying, self testing and communication testing to determine if the problem originates from the transmitter, receiver
or the telephone line.
4. Determine causes
Determine the causes of the equipment problem by troubleshooting.
5. Equipment repairs
Repair or replace the defective parts and take appropriate measures at this stage to ensure that the problem will not recur.
6. Confirm normal operation of the equipment
After completing the repairs, conduct copying, self testing and communication testing to confirm that the equipment operates
normally.
7. Record keeping
Make a record of the measures taken to rectify the problem for future reference.
15.1.2. Maintenance Check Items/Component Locations
Pick Up Sensor
Pick Up Sensor
Resist Sensor
(Manual Single feed Sensor)
Print timing Sensor
Exit Sensor
ADU Sensor
Cassette Sensor
Paper Empty Sensor
Paper Sensor
(MPT)
Paper Empty Sensor
LSU
OPC
Transfer Roller
Heat Roller
Pressure Roller
Exit Roller
Thermostat
Thermistor
ADU Feed Roller
Pick up Roller
Separation Roller
OPF Feed Roller
Separation Roller
Pick up Roller
Returd Pad
Returd Pad
Paper Feed Roller
Pick up Roller
(MPT)
Resist Roller