12
KX-NS0154
8 Service Mode
8.1. How to Change MAC Address Label
(Procedure after Replacing the Main P.C.B.)
When replacing the Main P.C.B., customer data shall be renewed before sticking the included MAC/Address.
8.1.1. Replacing Main P.C.B.
Note:
(*1) : If you reuse defective P.C.B. for another repairing unit by repairing. Peel off the CS-ID and MAC address label on original
bottom cabinet and keep them with defective P.C.B..
(*2) : If you do not reuse the defective P.C.B. by repairing, scrap the P.C.B. to prevent the leak of customer's information in flash
ROM.
8.1.2. Attaching MAC Address Label
Attach the new MAC address label to the unit by placing over the old label.
Attach the new label
Attach the new label
NEW MAC Address Label
NEW CS-ID Label
**********
To Next Page
Loading...
