4. Place the antennas so that they are pointing in directions that are 90 degrees apart (for antenna diversity),
as follows:
Reference for Wall Mounting (KX-T0141/KX-TDA0142)
Please copy this page and use as a reference for wall mounting.
Install a screw here.
Install a screw here.
71 mm
(2-13/16 in)
Note
Make
sure to set the print size to correspond with the size of this page. If the dimension of the paper output
still deviates slightly from the measurement indicated here, use the measurement indicated here.
38 Quick Installation Guide Document Version 2009-12
8 Wall Mounting
To Next Page
Loading...
