15
Installing the KX-T7601/KX-T7603
* Please use a USB cable shorter than 3 m.
3 Couple both hinges
and slide in the
unit.
4
Push down the cover until it locks,
and connect the USB cable to
USB port.
2 Insert the flat cable
into the connector.
The Add-on Key Module has
12 CO buttons. These
buttons are used to seize
an outside line, make a
call using One-touch
Dialling, or access
certain features.
3
Insert the flat cable into the
connector.
4 Close the cover.
1 Open the cover.
2
Attach the KX-T7603 to
your telephone with
screws.
<with a KX-T7603>
1 Remove the connector cover
using a screwdriver.
The USB Module can be connected between
the digital proprietary telephone and the
personal computer through USB interface to
implement personal CTI (Computer Telephony
Integration).
PULL
Connect to PC
KX-T7601 (For KX-T7633/7636)
includes USB cable
KX-T7603 (For KX-T7633/7636)
Unplug the extension line before you set up the USB Module and the Add-
on Key Module to the unit.
Installing the KX-T7601/KX-T7603
To Next Page
Loading...
