9
Settings on the Programming Mode
Setting Features
You can program features on the programming mode.
The original settings are shown in bold letters in the shaded boxes. Find and mark your
desired selections for programming.
Press
PROGRAM
or PAUSE.
Press ENTER
or STORE.
Press ENTER
or STORE.
OR
PAUSE
Follow
Programming
Input.
program no.
OR
PAUSE
Follow Selection
& Parameter.
To program To exit
To enter the
program mode
Press
PROGRAM
or PAUSE.
Selection & Parameter
Programming
Input
Item
How do you prefer to
receive an intercom call?
(Alternate Receiving–Ring/
Voice)
2
1
0
1
2
0
1
2
Ringing
[Tone Call]
Directly–The party's voice is heard
without ringing.
[Voice Call Deny]
Ring only–Prohibiting the caller
switching to the voice mode.
[Voice Call]
Which type of Call Waiting
for intercom calls do you
prefer?
(Call Waiting Selection)
3
1
0
1
2
No Tone
[CW Tone Off]
Tone
[CW Tone On]
Voice announcement through the built-in
speaker (OHCA)
[OHCA (Announce)]
3
Voice announcement through the
handset without pre-information
(Whisper OHCA)
[Whisper OHCA]
Do you prefer to receive
Call Waiting for outside
calls?
3
0
0
No
[CW Tone Off]
1
Yes
[CW Tone On]
Which type of Call Waiting
tone do you prefer?
(Call Waiting Tone Type
Selection)
3
2
0
Tone 1
[CW Tone 1]
1
Tone 2
[CW Tone 2]
PROGRAM
PROGRAM
OR
AUTO DIAL
STORE
OROR
program no.
OR
AUTO DIAL
STORE
[Voice Call]
[Back Light]
[C.Wait CO]
[C.Wait Ext]
[C.Wait Tone]
Do you turn on the display
backlight?
(Display Backlight Selection
for the KX-T7633/KX-
T7636)
0
4
Yes–ON in use
[Automatic]
Yes–always ON
[Always On]
No–always OFF
[Always Off]
Settings on the Programming Mode
To Next Page
Loading...
