Panasonic KX-T7630 - Programming System Speed Dial Numbers; To Clear Speed Dial Number; Programming System Speed Dial Names; Using Alpha Numeric Dial Pad

Page 5
PROGRAMMING SYSTEM SPEED DIAL NUMBERS
(Allocation Numbers 000 – 999)
Enter USER PROGRAMMING MODE LCD Display Reads:
1. Press Program Program No? 
2. Press ** Enter Password
3. Dial 1234 SYS-PGM NO? 
4. Dial 001 001 Speed dial number
5. Press Enter Location No.
6. Enter Location number (001, 002, 003, Etc) Speed dial No. 001
7. Enter 0 Then telephone number 001: 00882385155
8. Press Store
9. Press Hold SYS-PGM NO? 
10. Press Exit
TO CLEAR SPEED DIAL NUMBER
Enter USER PROGRAMMING MODE LCD Display Reads:
1. Press Program Program No? 
2. Press ** Enter Password
3. Dial 1234 SYS-PGM NO? 
4. Dial 001 001 Speed dial number
5. Press SP-Phone Location No.
6. Enter Location number (000, 001, 002, Etc) 001: 00882385155
7. Press Clear Soft Button 001:
9. Press Store 001:
10. Press Hold SYS-PGM NO? 
11. Press Exit
PROGRAMMING SYSTEM SPEED DIAL NAMES
Enter USER PROGRAMMING MODE LCD Display Reads:
1. Press Program Program No? 
2. Press ** Enter Password
3. Dial 1234 SYS-PGM NO? 
4. Dial 002 002 Speed dial Name
5. Press Enter Location No?
6. Enter Location number Speed Dial Name
(001, 002, 003, etc) 001
7. USING ALPHA NUMERIC DIAL PAD
a) Press Number corresponding to Alphabet
b) Press Key Once for each letter available in Upper Case
Letter Available options cycle from Upper case to Lower case
Example
 To type C in upper case press No 2 key (ABC) Three times
 To type O in lower case press No 6 key (MNO) Six times
 To type a Space press No 0 key
 To type any numeric number press appropriate key Seven times
 To type full stop, comma, colon, semi colan, apostrophe press 0 key
and cycle through available options.
 To advance to next letter press  (right arrow key)
 To back space press  (left arrow key)
10. Repeat steps (a) & (b) until name is complete
11. Press Store
12. Press Exit