Panasonic KX-TC1743B - Page 17

Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Your phone comes from the factory set to “A”.
Make sure the unit is in the standby mode.
Press ( R E D I AL/PAUSE/FUNCTION J .
2 Press B or B repeatedly until the arrow
points to “Program”.
Q Press EDIT (V)-
4 Press B or B repeatedly until the arrow
points to “Set line mode”.
r- Press EDIT®.
Press (B or B) to select “b” or “a”.
Program
► S a ve directory
Ringer volume
Ringer volume
► P rogram
Save directory
TAD program
► L CD contrast
Set flash time
Set flash time
► S e t line mode
Set dial mode
Line mode
: A
YA ► = S a ve
Press EDIT B (Save key).
®A beep sounds.
®To return to the standby mode, press
Line mode
©You can exit the programming mode any time by pressing [OFF) .
17