To Next PageTo Next PageWhat to do if my Panasonic Answering Machine does not work?
If your Panasonic Answering Machine isn't working, here are a few things to check: * Make sure the batteries are installed correctly. * Fully charge the batteries. * Check all the connections. * Unplug the base unit’s AC adaptor to reset the unit. Reconnect the adaptor and try again. * The handset might not be registered to the base unit. Register the handset.
Why is caller information not displayed on my Panasonic Answering Machine?
If caller information is not displayed on your Panasonic Answering Machine, you must subscribe to Caller ID service. Contact your service provider/telephone company for details. If your unit is connected to any additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. The name display service may not be available in some areas. Contact your service provider/ telephone company for details. Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again.
Why does my Panasonic Answering Machine handset beep and/or flash?
If your Panasonic Answering Machine handset beeps and/or flashes, it likely means the battery charge is low. You should fully charge the batteries.
Why can't I hear a dial tone on my Panasonic KX-TG6591 Answering Machine?
If you cannot hear a dial tone on your Panasonic Answering Machine, there are a couple of things you can check: * Ensure that the base unit’s AC adaptor or telephone line cord is connected properly. Check the connections. * You can test the telephone line by disconnecting the base unit and connecting the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/ telephone company.
Why is my Panasonic Answering Machine still flashing after charging?
If you have fully charged the batteries of your Panasonic Answering Machine, but the display still flashes, shows a battery icon, or the operating time seems shorter than expected, try these steps: * Clean the battery ends and the charge contacts with a dry cloth, then charge again. * It might be time to replace the batteries.
Why can't I register a handset to my Panasonic Answering Machine?
If you cannot register a handset to a base unit of your Panasonic Answering Machine, it might be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit.
Why does my Panasonic Answering Machine base unit not ring?
If the base unit of your Panasonic Answering Machine does not ring, the ringer volume might be turned off. Adjust the ringer volume.
Why is caller information displayed late on my Panasonic Answering Machine?
If caller information is displayed or announced late on your Panasonic Answering Machine, it could be that, depending on your service provider/telephone company, the unit may display or announce the caller’s information at the 2nd ring or later. Also, try moving closer to the base unit.
Why are caller list numbers not edited automatically on my Panasonic KX-TG6591?
If the caller list/incoming phone numbers are not edited automatically on your Panasonic Answering Machine, the Caller ID number auto edit feature might be turned off. Turn it on and try again. You might also need to call back the edited number to activate Caller ID number auto edit.
Why does the volume reset on my Panasonic KX-TG6591 Answering Machine?
If the receiver volume on your Panasonic Answering Machine is changed to level 4 (default), even though you set it to level 5 (maximum level), the receiver volume returns to level 4 after you hang up. Press MjN or MkN to adjust the volume every time or as needed.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG6591 |
| Category | Answering Machine |
| Language | English |
Essential safety warnings for power connection, installation, and general use.
Instructions for charging batteries, battery levels, and performance.
Steps for adding, editing, and erasing phonebook entries and groups.
Instructions for assigning phone numbers to speed dial keys.
Methods for accessing and programming various unit settings.
Setting alarms and blocking unwanted callers or calls without numbers.
Turning the answering system on/off and listening to callers.
How to listen to messages using the base unit or handset.
Accessing and controlling the answering system remotely.
Storing VM access number and managing VM tone detection.
How to check for and listen to new voice mail messages.
Transferring outside calls and establishing conference calls.
Lists common error messages and their solutions.
Quick checks and steps to take if the product is not functioning correctly.
