Panasonic KX-TC1743B - Page 19

Programmable Functions *
You can program the following function items using the handset near
the base unit The display shows the programming instructions See the
corresponding pages for function details
Make sure the unit is in the standby mode
Press (REDIAL/PAUSE/FUNCTION'
I
<Function menu>*
To store an item in the directory (p 49)
To select the ringer volume (p 21)
Press EDIT O
<Function menu>*
>lcd contrast To select the LCD contrast {p 22)
Set flash time To select the flash time (p 60)
Set line mode To select the line mode (p 17)
Set dial mode To select the dial mode (p 16)
Talk switching To set the auto talk feature (p 20)
tad program To program answering system functions (p 25)
During programming _ _
*To select a desired function item, press ® or ® repeatedly until the
arrow points to the item Then press EDIT ( ► ) to go to the next step
oIf the handset displays “No link to base Place on cradle and try
again ” and an alarm tone sounds, move closer to the b ase un i t and try again
oYou can exit the programming mode any time by pressing (OFF)
e|f you do not press any buttons for 60 seconds, the unit will return to the standby
mode