Panasonic KX-TC1743B - Page 22

t Programmable Functions
Selecting the LCD Contrast
You can program the handset LCD contrast (5 levels) To make the
handset display clearer, set to high level Your phone comes from the
factory set to level 3
Make sure the unit is in the standby mode.
-| Press [REDIAL/PAUSE/FUNCTION}
2 Press ® or £3 repeatedly until the arrow
points to “Program”
g Press EDIT ( ► ]
4 While the arrow points to “lcd
contrast”, press EDIT ( ► }
Ringer volume
► P rogram
Save directory
TAD program
► L CD contrast
Set flash time
LCD contrast
Low III High
▼ A ► = S a ve
5 Press [ ▼ ) or (X) to select the desired
contrast
• Each time you press or the LCD
contrast will change
6
Press EDIT [ ► } (Save key)
•A beep sounds
•To return to the standby mode, press [OFF]
LCD contrast
Low 11 High
•You can exit the programming mode any time by pressing [OFF]
22