Panasonic KX-TC1743B - Page 27

©In step 7, you cannot enter numbers greater than 12 Do not use military time.
(To set 13 00 hours, enter “0100” and select "PM” by pressing jjT))
If a power failure occurs, the time may be shifted When “©”
flashes on the base unit display, reprogram the current day/time
To check the day/time
Repeat steps 1 to 6 on page 26
©The current day/time is heard When finished, press (OFF)
For Caller ID service users (p 38)
•The Caller ID information will reset the clock after the first ring if the
adjusted time is incorrect However, the day will not be re-set by the Caller
ID information Adjust the correct day by following the steps on page 26
• If the time has not previously been set, the Caller ID information will not
adjust the clock
•The Caller ID information will automatically adjust the clock for daylight
saving time