Panasonic KX-TCD220SLT - 8 Operations; Turning the Power On;Off; Setting the Date and Time; Redialling

8 OPERATIONS
8.1. Turning the Power On/Off
Power on
Press
for about 1 second.
· The display will change to the standby mode.
Power off
Press
for about 2 seconds.
· The display will go blank.
8.2. Setting the Date and Time
Important:
· Confirm that the AC adaptor is connected.
· Ensure that
is not flashing.
Note:
· To correct a digit, press or to move the cursor, then make the correction.
· The date and time may be incorrect after a power failure. In this case, set the date and time again.
8.3. Redialling
Previously dialled phone numbers (each 24 digits max.) can be redialled.
8.3.1. Making a Call Using the Redial List
The last 10 phone numbers dialled are stored in the redial list.
8.3.2. Redialling the Last Number Dialled
21
KX-TCD220SLT / KX-TCA122EXT / KX-TCA121EXT