– 4 –
Displays
Handset display icons
Various icons appear on the handset display to indicate the current status of the unit.
Base unit display icons (KX-TCD240 only)
Following icons appear on the base unit display to indicate the current status of the unit.
w Within range of a base unit
L When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
L Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
k Handset is on an outside call.
o Call bar is on.
u Answering system is on. (KX-
TCD240 only)
5 Battery strength
[VE] Voice enhancer is set to high
or low tone.
[N] Night mode is on.
[X] Key lock is on.
[2] Handset number: The left icon
shows handset 2 example.
-2- Base unit number: The left
icon shows base unit 2
example.
F New SMS message received
(SMS users only)
[IN USE] KX-TCD230 users:
The base unit or another
handset is on a call.
KX-TCD240 users:
The base unit is on a call.
Another handset is on a call or
is using the answering
system.
d Answering system will answer
calls with a greeting message
and caller message will not be
recorded.
U Ringer volume is off.
TCD230_240FX(e)_QG.fm Page 4 Friday, May 20, 2005 11:59 AM
To Next Page
Loading...
