Panasonic KX-TCD230FX - Setting Dialling Mode (Tone;Pulse)

– 6 –
Turning the power on
Press {ih} for about 1 second.
Setting dialling mode (tone/pulse)
1
Press {j/OK}.
2 Select “Base Unit Setup”, then press {>}.
3 Enter “0000” (default base unit PIN).
4 Select “Call Options”, then press {>}.
5 Select “Dial Mode”, then press {>}.
6 Select the desired setting, then press {>}.
7 Press {ih}.
Setting the date and time
1
Press {j/OK}.
2 Select “Handset Setup”, then press {>}.
3 Select “Time Settings”, then press {>}.
4 Select “Set Date & Time”, then press {>}.
5 Enter the current day, month and year by selecting 2 digits for each.
6 Enter the current hour and minute by selecting 2 digits for each.
L You can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly.
7 Press {j/OK}.
8 Press {ih}.
Handset basic operations
Feature Operation
To turn the power off Press {ih} for about 2 seconds.
To make a call Dial the phone number, then press {C}.
To turn on the speakerphone Press {s}.
To hang up Press {ih}.
To adjust the receiver or speaker
volume
Press {e} or {v} while talking.
To redial the last number dialled Press {R}, then press {C}.
To make a call using the redial list Press {R}. Press {e} or {v} repeatedly to
select the desired number, then press {C}.
To answer a call Press {C}.
TCD230_240FX(e)_QG.fm Page 6 Friday, May 20, 2005 11:59 AM