Preparation
11
Base unit display icons (KX-TCD240
only)
Following icons appear on the base unit
display to indicate the current status of the
unit.
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
Important:
L Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 12).
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
KX-TCD230 users:
The base unit or another
handset is on a call.
KX-TCD240 users:
The base unit is on a call.
Another handset is on a call
or is using the answering
system.
Display
icon
Meaning
d Answering system will
answer calls with a greeting
message and caller
message will not be
recorded. (page 52)
U Ringer volume is off. (page
19)
Display
icon
Meaning
(220–240 V, 50 Hz)
To telephone
network
Hook
TCD230-240FX(e).book Page 11 Wednesday, June 8, 2005 7:15 PM
To Next Page
Loading...
