Base Unit Settings
36
Resetting the base unit to its
default settings
1
Press {j/OK}.
2 Select “Base Unit Setup”, then
press {>}.
3 Enter “0000” (default base unit PIN).
L If you changed the PIN, enter it (page
35).
4 Select “Other Options”, then press
{>}.
5 Select “Reset Base”, then press {>}.
6 Select “Yes”, then press {>}.
7 Press {ih}.
Note:
L The following items will be deleted or reset
to their default settings:
– Settings listed on page 32, 43, 51
– Base unit ringtone
– Base unit ringer volume (Medium)
– All SMS messages
– Caller list
L The following items will be retained:
– Date and time
– Shared phonebook entries (KX-
TCD240 only)
– Repeater mode
– Recordings, including your greeting
message, caller messages, voice
memos, audible call announcements,
and recorded conversations (KX-
TCD240 only)
TCD230-240FX(e).book Page 36 Wednesday, June 8, 2005 7:15 PM
To Next Page
Loading...
