- To exit the operation, press any time.
- *1: The factory preset is 0000.
- *2: If
is selected, is dispalayed (Refer to Handset
Display ()).
6.11. Selecting the Display Language
- To exit the operation, press any time.
- *1 You can select one of 10 languages. If you set a language you cannot
read, reset the handset to its initial settings.
Press MENU
DOWN RIGHT UP RIGHT 4-digit Handset
PIN
UP OK
All handset setting will be reset to their initial settings, however, the
Phonebook data will be saved.
6.12. Selecting Dialling Mode (Tone/Pulse)
You can change the dialling mode to tone or pulse depending upon your network service. If you have
17
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
