Panasonic KX-TCD410AXM - Eeprom Layout (Handset)

Address Default Name
Country
Setting
Type Description
0F4B 01 Config1 03 D BsUiTask configuration (MSB)
Bits 1=enable 0=disable
0: AmPmClockSettingEnabled, enabl
e
1: ClipDetectionSettingEnabled, disa
b
2: AkzMenuEnabled, disabled
3: HakzMenuEnabled, disabled
4: RussianClipSttingEnabled, disable
d
5: SmscSendNumberSettingEnabled,
disabled
6: SMSPabxSupportSettingEnabled,
disabled
7: Unused
0F4C F7 Config2 07 D BsUiTask configuration (LSB)
Bits 1=enable 0=disable
0: FlashTime1Enabled, enabled
1: FlashTime2Enabled, enabled
2: FlashTime3Enabled, enabled
3: KeyClicksEnable, disabled
4: ARSCarrierMenuEnabled, enabled
5: ARSIntDeletionMenuEnabled, ena
b
6: ARSMultipleCarrierMenuEnabled,
enabled
7:
A
RSMultipleAreaCodeMenuEnable
d
enabled
0F4E 0F Config2 FF D BsUiTask configuration 2
Bits 1=enable 0=disable
0: RingerModeMenuEnabled, enable
d
1: CallRestrictionMenuEnabled, enab
l
2: CancelHandsetMenuEnabled, ena
b
3: BaseToneMenusEnabled, enabled
4: ARSMenuEnabled, enabled
5: CallCostMenuEnabled, enabled
6: BasePINMenuEnabled, enabled
7: DialModeMenuEnabled, enabled
28. EEPROM LAYOUT (HANDSET)
28.1. Scope
The purpose of this section is to describe “layout of the EEPROM (IC2) KX-A141 Handset”.
The EEPROM contains hardware, software, and user specific parameters. Some parameters are set
during production of the handset e.g. crystal oscillator adjustment at 0000..01, some are set by the
user when configuring the handset e.g. ringer volume at 0F38, and some during normal use of the
phone e.g. redial memory at 0311..0392.
67
www.freeservicemanuals.info
11/8/2014
Digitized in Heiloo, Holland