*1 If there is no item stored in the phonebook, the display shows .
*2 Digits are cleared to the left of the flashing digit.
*3 Digits are added to the left of the flashing digit. If you need to clear or add more than one digit,
repeat the steps from 5.
*4 Characters are added to the left of the flashing character. If you need to clear or add more than one
character, repeat the steps from 8.
*5 To continue clearing another caller information, repeat the steps from 2.
8.5.2. Storing the Phone Number into the Phonebook When Pre-dialling
- To exit the operation, press any time.
*1 If you need correction, press CLEAR. Digit is cleared to the left, then enter numbers.
8.5.3. Storing the Number from the Redial/Caller List into the Phonebook
- To exit the operation, press any time.
24
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
