use specified manufacture’s parts.
3. The S mark means the part is one of some identical parts. For that
reason, it may be different from the installed part.
4. ISO code (Example: ABS-94HB) of the remarks column shows quality
of the material and a flame resisting grade about plastics.
5. RESISTORS & CAPACITORS
Unless otherwise specified;
All resistors are in ohms (
) K=1000 , M=1000k
All capacitors are in MICRO FARADS (
F)P= F
*Type & Wattage of Resistor
35.1. Base Unit
35.1.1. Cabinet and Electrical Parts
Ref. No. Part No. Part Name & Description Remarks
1 PQGG10154W5 GRILLE ABS-HB
2 PQKM10586Z4 CABINET BODY ABS-HB
3 PQHR10962Z OPTIC CONDUCTIVE PARTS, LED LENS
4 PQJT10203Z TERMINAL
5 PQKE10356Z1 GUIDE, CHARGE TERMINAL CASE POM-HB
6 PQSA10131Z ANTENNA, MAIN
7 PQSA10132Z ANTENNA, SUB
8 PQYF10560Z4 CABINET COVER ABS-HB
9 PQGT16188Z NAME PLATE
35.1.2. Main P.C.Board Parts
Note:
(*1) When replacing IC1, data need to be written with PQZZTCD410AX.
80
www.freeservicemanuals.info
Digitized in Heiloo, Holland
To Next Page
Loading...
