Panasonic KX-TCD450 Series

6.4. Reset
6.4.2. Handset
6.4.1. Base Unit
· To exit the operation, press any time.
· *1: The factory preset is 0000.
Base Unit Initial Settings
Function Initial Setting Remarks (selectable options)
Ringer Mode All Handsets All Handsets/Specific Handset No.
Number of Rings 3 Up to 6 rings
Dialling Mode Tone Tone/Pulse
Pause Timing 3 seconds 3 seconds/5 seconds
Call Restricted Handsets All Clear Each Handset can be set indivisually.
Call Restriction Numbers All Clear Up to 10 numbers (up to 8 digits)
4-Digit Base Unit PIN 0000 -
Flash Timing 700 msec 100/700/200 msec
ARS Setting OFF ON/OFF
Carrier Code All Clear -
Area Code All Clear -
Relation of Area Code All Area Code to Carrier Code 1 1to5
You can reset all of the handset settings to their initial settings.
· To exit the operation, press any time.
· *1: The factory preset is 0000.
14
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT