Panasonic KX-TCD450 Series

8 OPERATIONS
8.1. Power On/Off
*1 When button is released, the display changes to the standby mode.
*2 The display goes blank.
8.2. Making a Call
*1 If you need to make a correction, press CLEAR. The digit is cleared to the left, then you can enter numbers. All digits are
cleared if you press and hold CLEAR.
*2 You can also press SPEAKERPHONE to make a call.
8.3. Answering a Call
*1 You can also answer a call by pressing any dialling button, INTERCOM, , or SPEAKERPHONE.
8.4. Setting the Clock/Date
After a mains power failure the clock needs to be reset. Ensure that icon is not flashing.
· To exit the operation, press any time.
*1 You can enter the time in 12 hour clock or 24 hour clock.
For example, to set 7:15 (12 hour clock), press 0715.
If you enter the time in 24 hour clock, go to step 4.
*2 If AM or PM is not selected, display will show 24 hour clock even if the time has been entered in 12 hour clock.
*3 For example, to set the 16th of February, 2003, enter 160203.
22
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT