6.15. Summary of Programmable Functions
You can select and execute the following functions by pressing direct command as follows without programming.
These operations need to be done with the Handset near the base unit.
Press
. Press or until the arrow points to , then press .
is displayed.*1
*1 If any key is not pressed over 60 seconds, the display will return to “Setting Base”.
*2 Refer to PIN Code (P.12) for more details.
19
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT
To Next Page
Loading...
