16 RF SPECIFICATION
16.1. Base Unit
Item Value Refer to -. * Remarks
TX Power 20 dBm ~ 25 dBm Adjustment (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/div Adjustment (Base Unit) (I) Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz Adjustment (Base Unit) (J)
RX Sensitivity < 1000 ppm Adjustment (Base Unit) (K)
Timing Accuracy < ± 5.0 ppm Adjustment (Base Unit) (L)
RSSI Level 0x34 hex ± 10 hex Adjustment (Base Unit) (M)
*:RefertoAdjustment (Base Unit) (P.44)
16.2. Handset
Item Value Refer to -. ** Remarks
TX Power 20 dBm ~ 25 dBm Adjustment (Base Unit) (H)
Modulation 340 kHz/div ~ 402 kHz/div Adjustment (Base Unit) (I) Data type: Fig31
Frequency Offset -40 kHz ~ +40 kHz Adjustment (Base Unit) (J)
RX Sensitivity < 1000 ppm Adjustment (Base Unit) (K)
Timing Accuracy < ± 10 ppm Adjustment (Base Unit) (L)
RSSI Level 0x34 hex ± 10 hex Adjustment (Base Unit) (M)
** : Refer to Adjustment (P.51)
17 HOW TO CHECK THE HANDSET SPEAKER
1. Prepare the digital voltmeter, and set the selector knob to ohm meter.
2. Put the probes at the speaker terminals as shown below.
55
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT
To Next Page
Loading...
