·
To exit the operation, press any time.
*1 If there is no item stored in the phonebook, the display shows
.
*2 Characters are cleared to the left of the flashing character.
*3 Characters are added to the left of the flashing character. If you need to clear or add more than one character, repeat the
steps from 4.
*4 Digits are cleared to the left of the flashing digit.
*5 Digits are added to the left of the flashing digit. If you need to clear or add more than one digit, repeat the steps from 7.
*6 To continue clearing another caller information, repeat the steps from 2.
*7 You can also press SPEAKERPHONE to make a call.
27
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT
To Next Page
Loading...
