EasyManua.ls Logo

Panasonic KX-TCD450 Series - Page 70

Panasonic KX-TCD450 Series
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Address Default Name Country
Setting
Type Description
09F2 00 HsRegInfo.EmcFlags x D Handset registration info - EMC flags
Bit
6..7: not used
0..5: handset 1..6 info, 1=known , 0=unknown
09F3 21 RingMode x D Ring mode. Modes used in KAMMA4 are 20h and 21h.
Bit
7..5: Mode (001=group)
4 : Not used
3..0: Id (001= id of first group)
27.3.3. Flash Time setting
Address Default Name Country
Setting
Type Description
0F0B 08 CalibBreakTime[0] 0A D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 80 ms
0F0C 14 CalibBreakTime[1] 46 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 200 ms
0F0D 46 CalibBreakTime[2] 14 D Calibrated loop-break time for short break
Unit: 10 ms, defaultst to 700 ms
27.3.4. Clip (Caller ID) configuration
Address Default Name Country
Setting
Type Description
0F1C 70 Detect 74 D CLIP detect configuration
Bit
0-2: Mode: 0: Learn mode, 1: DTMF only, 2: FSK
only, 3: Generic mode, 4: Russian CLIP only
3: Unused4
4: Onhook: 1=enable 0=disable
5: Offhookk: 1=enable 0=disable
6: Msgwaiting: 1=enable 0=disable
7: Unused7
0F37..38 3D 01 Parse.Configuration 3D 00 D Clip parse set configuration
Bit
0: Etsi: 1=enable 0=disable
1: ForwardNumber: 1=enable 0=disable
2: Danish: 1=enable 0=disable
3: Dutch: 1=enable 0=disable
4: Canadian: 1=enable 0=disable
5: Swedish: 1=enable 0=disable
6: UserDefined: 1=enable 0=disable
7: KPN vmwi: 1=enable 0=disable
8: ProtocolPriority:
If 2 mutually exclusive parameters occurs, the 1st in
the protocol message has priority.
1=enable 0=disable
9: UseCallType:
Verify the Call Type parameter, if available, when
receiving Call Back CLIP at busy subscriber.
1=enable 0=disable
10: AddTop0IfNo0
Automatic addition of 0 if top of Caller ID is not 0.
1=enable 0=disable
11: DtmfDigitsOnly
Parse DTMF clip without start and/or stop code.
1=enable 0=disable
12..15: Reserved12..Reserved15
0F3D 00 Rcid.Mode x D RCID mode
Bit
0: answer-mode,
1=auto-answer, 0=manual answer
1..4: 0
5: detect length,
1=enable(development only), 0=disable
6: add category,
1=enable(development only), 0=disable
7: 0
70
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT

Table of Contents

Related product manuals